The 1000 Series is a Semi-Down Draft. It is designed to draw air entering the booth cabin from the upper levels of the booth. Then it is filtered down through the Ceiling Filters into the Paint Booth and moves the air to the back of the Spray Booth. Finally it is filtered through the Exhaust System. Available in drive through or drive in - back out designs. Platinum & Silver Series
The 2000 Series Side-Down Draft is an automotive booth designed to intake fresh air from the fully filtered ceiling plenum and exhaust it at the floor level, lower side exhaust plenums. This booth is customized to fulfill all the rigorous needs of the more advanced water-borne coatings, providing efficient overspray control that reduces prep time and provides a healthy workplace environment.. Available in drive through or drive in - back out designs. Platinum & Silver Series
THE FULL DOWN-DRAFT BOOTH is considered by many to be the most effective of all automotive designed paint spray booth to accomplish the following: Clean intake air travels from filtered plenum overhead, past the operator’s face, to exhaust filters.Less overspray potential on the material being painted.Less downdraft velocity required to move hazardous VOC’s in a natural downward movement.Downward face velocity approximately 50 feet per minute.This design comes in Solid-Back (DD) or Drive-Through (DDT) models.Platinum & Silver Series
As a leading truck paint booth manufacturer, we understand the importance of having enough space to paint large trucks and other items. Other truck spray booth companies don't go the extra mile that we do to make sure with a larger sized booth you also have adequate ventilation and lighting. Available in drive through or drive in - back out designs. Platinum & Silver Series - Semi-Down Draft, Side-Down Draft, Full-Down Draft, Cross-Flow Draft
We carry the best of Powder Coating Equipment. We have powder coating systems at unbeatable prices for our customers. Our powder guns come with full manufacturer's warranty and will meet all your powder coating needs. Our Powder Booths make efficient use of shop space and are designed for manual “batch” or automated/process powder coating with or without over spray reclamation. Shop air is drawn into the spray booth, and then passes through the booth’s workspace into a filtered plenum integrated into the wall(s). The air is filtered in multiple stages and then discharged to the outside atmosphere or routed back into the room. Disposable filters are easy to inspect and replace. Optional reclaim systems are available. Intelligent design allows for installation with limited overhead clearance. First set of filters is provided with each booth.
Our Open Face Booths are designed for many industrial and furniture finishing. Air flow is pulled in through the open front, across the painter and parts being sprayed, and then exhausted through the filter bank in the back wall of the booth. The filtered exhaust air is pulled through the exhaust plenum and discharged straight up and into the atmosphere through and exhaust stack, (Optional. The Industrial Open faced spray booths feature a modular design that offers the efficiency and economy of our standard booths. The specifications and designs can be customized to fit a variety of sizes and configurations and to fit a broad range of finishing processes. These booths come in a wide range of widths and depths to meet your needs.
BENCH BOOTHS are similar to Floor Filter booths but are used when smaller items, such as toys, are to be coated.All Bench-Type Paint Spray Booths adhere to the Uniform Fire Code and the National Electrical Code. Always check local fire and electrical codes for special conditions that may prevail in your area.Platinum & Silver Series.
Designed as a compact and economical solution for your curing needs, MDI CURING OVENS provide uniform temperature and balanced air throughout the oven; using a combination of side & up air flow with adjustable louvers to recirculate the heated air on both sides of the oven. The 4” tongue & groove, 20-gauge double-wall aluminized insulated panel maximizes heat retention; and its 24” modular design allows for a variety of depths to be accomodated, starting from 6ft to anything greater-meeting needs. MDISpray Systems’ Equipment is designed to provide a safe and efficient environment for your operation. Available in natural gas,or propane. Standard temperature range is 300°F to 500°F. Gas supply pressure from 1 PSIG to 5 PSIG. Air Flow Switches and Interlocks. The gas manifold features valving that meets fire insurance requirements. Uni-Flow Air Distribution.
Low Temperature Recirculating Heat Systems are designed to force-dry a product in a temperature-controlled enviroment, such as a spray booth or frying room. The heat system includes a recirculating fan with conveys air through an indirect gas-fired duct furnace, which is thermostatically controlled. The recirculating air does not come in contact with the open flame because it is conveyed through an indirect heat exchanger and therefore may be used for spray booth and drying room enviroments.